Toyoda GOP 10-30 Universal Cylindrical Grinder

SWING................................................8"
DISTANCE BETWEEN CENTERS.............................12"
CENTER HEIGHT........................................4"
MAX. GRINDING DIAMETER...............................2.36"
MAX. LOAD BETWEEN CENTERS............................44 LBS
WHEELHEAD:
TOTAL STROKE.........................................6.87"
TOTAL STROKE THROUGH MICROMETRIC MECHANISM...........6"
HYDRAULIC RAPID APPROACH AND WITHDRAWL STROKE........1"
AUTOMATIC FEED APPROACH STROKE.......................0.02"
AUTOMATIC INFEED AT THE END OF THE TABLE TRAVERSE....0.00005~0.0012"
INFEED PER HANDWHEEEL TURN...........................0.025"
GRADUATION OF THE WHEELHEAD HANDWHEEL................0.0001"
WHEEL (OUTSIDE DIA.x WIDTH x INDSIDE DIA.)...........14" 1.5" X 5"
REVOLUTIONS PER MINUTE...............................1,800;2,100;2,500 R.P.M.
NUMBER OF SPEED CHANGE (BY PULLEY CHANGE)............3
TABLE:
MINIMUM AUTOMATIC RECIPROCATING STROKE...............0.08"~0.12"
SPEED RANGE..........................................2"~106"/MIN
SWIVELLING ANGLE.....................................12 DEGREES, 7 DEGREES
HANDLE FEED AMOUNT (PER TURN)........................1"
WORKHEAD:
CENTER...............................................MT NO. 2
NUMBER OF SPEED CHANGE...............................4 (STANDARD) STEPLES (SPECIAL)
SPINDLE REVOLUTIONS..................................500 (STANDARD) 30~500 (SPECIAL)
LIVE OR DEAD SPIONDLE................................LIVE
SPINDLE HOLE DIAMETER................................0.6"
FOOTSTOCK:
CENTER...............................................MT NO.2
MAX. WITHDRAWL OF CENTER.............................0.8"
TIMER ADJUSTING RANGE................................0~30 SEC
MOTORS:
FOR WHEELHEAD........................................3 HP
FOR WORKHEAD.........................................1/4 HP
FOR HYDRAULIC PUMP...................................1/2 HP
FOR WHEEL SPINDLE BEARINGS PUMP......................1/3 HP
FOR COOLANT PUMP.....................................1/3 HP
TANK CAPACITY:
FOR HYDRAULIC MECHANISM..............................7.9 GAL.
FOR WHEEL SPINDLE BEARINGS...........................1.6 GAL.
FOR COOLANT..........................................15.8 GAL.
FLOOR SPACE REQUIRED.................................89.5" x 64" x 51.5"
NET WEIGHT...........................................3,970 LBS