Micro-Vu Vector M3021612 Measuring System

X-Y-Z Performance
VECTOR 6 x 6 VECTOR 12 x 12
Accuracy

XY Accuracy: U2=(5.0+L/50) µm U2=(7.0+L/50) µm
Z Accuracy: U1=(4.0+L/25) µm U1=(4.0+L/25) µm

Note: L is the length of measurement in millimeters

Features
OPTICS
Lens................................................... 25X - 150X standard, zoom 6.5:1 range
Video.................................................. High-resolution, solid state, black & white
Profile light (no edge detector) ........ #L1009, 1.6 watt halogen, 30,000 hours
Profile light (edge detector) ............. #L1024, 2.0 watt halogen, 5,000 hours
Surface light (all models) ................. #DDS, 150 watt via fiberoptic cable, 200 hours

Q-16 Controls
• 16-bit Processor
• 100 Memory locations (battery backup)
• RS232 Computer interface
• RS232 Printer interface
• Inch/metric operation with instant conversion capability
• Zero reset at any position
• Resolution to .0001" (.002 mm)
• Serial RS232 dual output

Special metrology features:
• Skew calibration and mode for part alignment
• Radius, center find and polar coordinates from 3 points to 9
• Angle and vertex calculation from 4 points to 18
• Memory storage for 100 sets of X and Y points
• Polar/Cartesian conversion; preset; incremental/absolute conversion (recall of current X and Y distance between current position and all stored points; recall of all 100 stored points; recall of direct polar distance between current position and all stored points)
• Absolute and incremental measurement capability

The preceding features apply to the basic manual VECTOR system. Following is a list of options which may be included with your order.

Accessories and Options
• InSpec 3D Metrology Software featuring:
> Ability to measure part; store and recall part programs for prompting
> Tolerance dimensions
|> Export data
• Color video system
• Super high resolution color video system
• 12" Z travel (not available on 6”x6” models)
• ED-51 edge detector
• Third axis linear encoder
• FD-10 focus detector
• Measuring crosshair generator (CVR)
• .5X zoom multiplier
• 2X zoom multiplier
• Video printer
• Right-angle mirror fixture
• Foot switch
• Impact printer
• Programmable Q16

For additional data on the InSpec software, ED-51 Edge Detector, FD-10 Focus Detector, the CVR, or the Video Printer, please refer to the specific manuals for those features.

Physical Specifications

VECTOR 6 x 6 VECTOR 12 x 12
Width + console 17" + 13" 28" + 13"
Depth + console 28" + 16" 42" + 16"
Height + console 34" + 30" 40" + 30"
Weight + console 85 + 65 lbs. 350 + 65 lbs.

GLASS MEASURING STAGE (TABLE)

Surface area 8½" + 11" 15½" + 17½"

Working height
(on a 29" bench)
37"
42"
Power 110 vac, 6 amps,
50 - 60 Hz 110 vac, 6 amps,
50 - 60 Hz